FAQ
Straight answers.
65 questions, answered properly — including the ones that are slightly awkward for us. If yours is not here, call 623-207-8796 and ask.
General
How fast can you get here?
In Peoria, Glendale, Sun City and El Mirage we are usually 15–30 minutes out during working hours. Further west or across the valley runs 30–60. When you call we give you a real window rather than an optimistic one, and we tell you if we cannot make it rather than leaving you waiting.
What does it cost?
Every service has a published range on our pricing page, and you get an exact number before any work starts — not after. A standard car or house lockout runs $75–$135. Rekeying is $20–$35 per lock plus one trip charge for the visit, so a typical four-door home is about $155–$215 all in.
Are you open 24/7?
No, and we would rather say so than pretend. Our normal hours are Monday to Friday, 7am to 6pm. Evenings and weekends are by appointment — call or text and we will tell you straight away whether we can get to you. A locksmith who claims 24/7 and then does not answer at 2am has wasted the worst hour of your week.
Do you charge a separate call-out fee?
No. For most jobs the trip is already inside the price you are quoted. The two exceptions are rekeying and key cutting, which are priced per lock or per key plus a single trip charge for the visit — one charge, not one per lock.
Will you have to drill my lock?
Almost never. The overwhelming majority of lockouts are picked or bypassed and the lock keeps working afterwards. Drilling is reserved for genuine high-security cylinders that cannot be manipulated, and we tell you before we reach for a drill, not after.
What proof do I need that it is my car or house?
Something linking you to the property: a driver's licence with the address, a lease, registration, an insurance card, or mail at the address with your name. Be suspicious of any locksmith who does not ask — that check is what stops someone else doing this to you.
Are you licensed and insured?
Locksmith 365 LLC is insured and bonded, and we are happy to send proof before we arrive. Worth knowing: Arizona does not license locksmiths at the state level, so anyone claiming a state locksmith licence here is telling you something that does not exist. Judge on insurance, a branded vehicle, a real local number and an itemised invoice.
Do you take cards?
Yes — card, tap, and digital wallets, and you get an itemised invoice every time. Cash-only with no receipt is a warning sign, not a discount.
Can you make a car key if I have lost every single one?
Yes. That is one of our most common automotive jobs. We originate the key from scratch at your vehicle, cut the blade to the vehicle's code, program the chip, and delete the lost keys from the immobiliser so they stop working.
Should I rekey or replace my locks?
Rekey, in most cases. It changes the pins so old keys stop working while the hardware stays on the door, and it costs a fraction of replacement. Replace only when the hardware is damaged, badly worn, or you want to upgrade grade or finish.
I just moved in. What should I actually do?
Rekey every exterior door, and key them all alike so you carry one key instead of four. Assume copies exist — previous owners, their kids, a cleaner, a contractor, the neighbour who watered the plants. Nobody remembers every key they handed out. It is one visit and it is the cheapest security you will ever buy.
Do you work on all vehicle makes and models?
Yes, including push-to-start and proximity smart keys. The vans carry key cutting machines, transponder programmers and diagnostic tablets, so the work happens where the car is parked. Some high-security European models take longer and cost more, and we tell you that up front.
Automotive
Automotive servicesWill you break my window?
No. Breaking glass is a last resort reserved for a genuine emergency such as a child or animal locked in heat, and even then only with your explicit go-ahead or emergency services on scene. Normal lockouts are opened with wedges and reach tools.
Do I need to prove the car is mine?
Yes, and you should be suspicious of anyone who does not ask. A driver's licence plus registration, insurance card, or a matching name on the vehicle paperwork is enough. If the paperwork is locked in the car, we can usually work from a matching address on your ID.
Can you get into the trunk if the key is in there?
Usually. Most vehicles let us reach the trunk release through the cabin once the door is open. On cars with no interior release, we can often pick or decode the trunk lock instead.
Can you make a key with no original to copy?
Yes. That is the job. We read the vehicle's key code or decode a lock directly, cut a fresh blade to spec, then pair the chip to the immobiliser through the diagnostic port.
Is this cheaper than the dealership?
Nearly always, and the gap widens once you count the tow. Dealers charge for the key, the programming and the shop time, and they rarely come to you. Ask us for the number before we start — you will have it in writing.
Will the old lost key still open my car?
Not after we are done. When we program a replacement we wipe the stored keys from the immobiliser and re-add only the ones in your hand. If someone finds the lost key, it is a piece of metal.
I bought a fob online — can you program it?
Often yes, and we are happy to try. Be aware that cheap fobs sometimes ship on the wrong frequency or with a chip that will not take a session. If yours will not pair, we will show you why and you can decide whether to use one of ours.
Why does my fob only work right next to the car?
Almost always a weak battery or a corroded contact, occasionally a cracked antenna trace inside the fob. All three are quick to diagnose and two of them are cheap to fix.
The hardware store cut me a key and it will not start the car. Why?
They cut the metal but did not program the chip — most of them cannot. The blade will turn the lock, the immobiliser will refuse to release fuel or spark. Bring that key out and we can often program it rather than cutting a new one.
Does programming a spare erase my current key?
No, not when we are adding a key. We only wipe the stored set when you have lost a key and want it disabled, and we tell you before we do it.
My car says 'no key detected' but the fob is right there.
Usually a dead fob battery. Every push-to-start vehicle has a backup: a specific spot to hold the fob against — the steering column, the console tray, or the start button itself — that reads the chip without radio. We can show you where yours is.
Can you do this cheaper than the dealership?
In most cases yes, and we come to the car rather than the other way round. Smart keys are genuinely expensive hardware, so expect a real number rather than a bargain — we will give it to you before we order anything.
My key will not turn at all. Is the ignition broken?
Not necessarily. Try turning the steering wheel firmly left and right while gently turning the key — a steering lock under tension binds the cylinder and mimics a failure. If that frees it, your ignition is fine and the problem was load, not wear.
Will I need a new key as well?
Only if yours is visibly worn. When we replace a cylinder we key it to your current key wherever the hardware allows it, specifically so you do not end up with two.
Can I pull it out myself with pliers or glue?
Please do not. Pliers need a protruding stub to grip and usually push the blade deeper when there is not one, and superglue bonds the fragment to the wafers — that turns a short extraction into a full cylinder replacement.
Can you cut a new key from the broken piece?
Often, yes. If the bow and enough of the blade survived we can decode it directly. Failing that we decode the lock itself and cut from the code.
How much cheaper is this than replacing a lost key?
Meaningfully — often half or less. With a working key in hand we skip the decoding and the all-keys-lost immobiliser procedure, which is where most of the labour in a lost-key job sits.
Can you make two or three at once?
Yes, and the per-key price drops when you do. The setup is the same whether we cut one or three.
Residential
Residential servicesWill you have to drill my lock?
Almost never. Standard residential cylinders are picked or bypassed and keep working afterwards. Drilling only comes up on genuine high-security hardware, and only after we have told you and you have agreed.
What do I need to show you?
Proof that you live there — a licence with the address, a lease, a utility bill, or mail at the property with your name on it. It protects you as much as it protects us.
I lost my keys entirely. Should I rekey?
If they are genuinely lost rather than misplaced inside, yes — especially if anything on the keyring identified your address. We can rekey at the same visit for much less than a second callout.
Rekey or replace — which do I need?
Rekey, unless the hardware is damaged, badly worn, or you want to upgrade the grade or the finish. Rekeying is faster and significantly cheaper, and the security outcome is identical: old keys stop working.
Can every door use the same key?
Yes, as long as the locks share a keyway — and most homes do. Keying alike is the single most-appreciated thing we do on a move-in visit.
How long does a whole house take?
A typical three-to-five door home is under an hour. We work door by door so the house is never left open.
Does the brand of deadbolt really matter?
Less than people think. A mid-range Grade 2 deadbolt in a reinforced frame beats a premium Grade 1 in a frame held together by short screws. Spend on the installation before you spend on the lock.
Can you put a deadbolt on a door that has never had one?
Yes. We bore the door and mortise the jamb to spec. It takes longer than swapping an existing lock, and we will quote that difference before starting.
Repair or replace?
Repair if the housing is sound and the fault is wear or alignment, which covers most calls. Replace when the body is cracked, the finish has corroded through, or parts are no longer made. We will show you which one you have.
Should I spray WD-40 in the lock?
No. It is a solvent and a water displacer, not a lubricant — it strips what little lubrication is left and then collects dust, which in Phoenix is a fast route to a seized cylinder. Use a dry graphite or PTFE lock lubricant.
What happens when the batteries die?
Every smart lock we fit keeps a physical key override, and we key it to your existing doors. Most also take a 9-volt battery held against external contacts to get you in once. The lock warns you for weeks first.
Are smart locks less secure than a normal deadbolt?
The bolt and the frame are identical — that is where physical security lives. What changes is the risk of weak or shared codes, so we set yours up properly and show you how to rotate guest codes.
Am I allowed to change a cluster box lock myself?
If you own the box, yes — and most HOA cluster units are owner-maintained. USPS-owned boxes are a different matter and have to go through the post office. We will tell you which yours is before we touch it.
Can you match it to my house key?
No. Mailbox cam locks use a different keyway entirely, so they stay a separate key. We cut you several so there is a spare.
Why do my gate locks keep seizing?
Full sun, fine dust and oil-based lubricant. The oil collects grit and sets into a paste. Switching to a dry PTFE or graphite lubricant and fitting a weather-rated lock usually ends it.
Can the garage door use the same key as my house?
Yes, as long as the keyway matches — and if it does not, swapping that one cylinder is cheap. We do it on most rekey visits.
Can you copy a key stamped 'do not duplicate'?
With authorisation, yes. That stamp has no legal force on an ordinary keyway — it is a request. A genuine restricted keyway is different: it is patent-protected and we need documented permission from the system owner, which we will ask for.
Why does my store-cut copy stick?
It was traced from a worn key, so it copied the wear and added cutting tolerance on top. Cutting from the lock's code instead produces a key to original spec.
Commercial
Commercial servicesWhat authorisation do you need?
Something tying you to the business: a lease, a business licence, a utility bill in the company name, or a manager on the phone who can confirm it alongside your ID. It is quick, and it is what stops someone else doing this to you.
Can you come before opening?
Yes — early starts are usually easier for us than mid-afternoon. Call or text the night before and we will lock in a time.
Can you work outside business hours?
Yes, and for a multi-door rekey it is usually the right call. Evening and early-morning slots are available by appointment.
Can you keep our master key system intact?
Yes. We rekey within the existing hierarchy so your masters keep working, or rebuild the chart from scratch if the old one has drifted out of date.
Does master keying weaken the locks?
A master-keyed cylinder has more shear points than a standard one, which is a real and well-understood trade-off. Using a quality cylinder and a properly designed chart — rather than a sprawling ad-hoc one — keeps that margin small. We will say plainly where it matters for your doors.
Can you extend the system we already have?
Usually yes, if we can identify the keyway and derive the existing bitting. If the original chart is gone we can often reverse-engineer it from your keys. Bring everything you have.
What stops staff copying their keys?
A restricted keyway. The blanks are patent-protected and only available to authorised dealers, so a copy needs your written authorisation rather than a trip to a kiosk.
What happens in a power cut?
That is a design decision we make with you. Fail-secure keeps the door locked and is standard on exterior doors; fail-safe releases it, which fire code requires on certain egress routes. Either way, mechanical egress from the inside always works — people can always get out.
Do we have to replace every door?
No, and you should not. Most sites control two or three doors that matter and leave the rest mechanical. We will tell you which ones earn it.
Can I lock a fire exit from the inside after hours?
No. Any device requiring a key, a twist or a second motion to get out is a violation and a genuine danger. Where security is the concern, alarmed or delayed-egress hardware is the legal way to solve it, and we can fit it.
Our panic bar does not latch properly. Repair or replace?
Often repair. Most non-latching devices are misaligned, have a worn strike, or sit on a door whose closer is out of adjustment. We diagnose before quoting a replacement.
Is this worth it over a good standard deadbolt?
For a home, usually not — a reinforced frame matters more. For a business holding inventory, cash, records or controlled substances, yes, and the deciding factor is nearly always key control rather than pick resistance.
What if we lose a high-security key?
You call us and we re-pin to a new bitting within your system. Because blanks are controlled, a lost key is far less dangerous than a lost standard key — nobody can walk into a store and copy it.
Can you open it without ruining the cabinet?
Nearly always. Furniture locks are simple wafer locks and they pick quickly. Drilling a cam lock is a last resort and we would replace it afterwards anyway.
Can one key run every cabinet in the office?
Yes. Keying alike across furniture is cheap and it is the single most useful thing we do on an office visit.
The door shuts but does not latch. Is that the closer?
Usually yes, and usually the latch-speed adjustment — the last few inches need enough force to drive the latch into the strike. It is also the most security-relevant setting on the door, because a door that does not latch is a door that is not locked.
Can you make a heavy door easier to open?
Within limits, yes. Closers have an adjustable spring size, and accessibility guidance caps opening force on many interior doors. We set it as light as the door and the code allow.
Still not sure?
Describe what happened and we will tell you what it needs — including when the honest answer is that you do not need a locksmith at all.
Mon–Fri 7am–6pm · evenings & weekends by appointment