Skip to content
My Locksmith

Commercial

Door Closer Repair & Installation

Doors that slam, stick, or never quite latch.

A door closer is invisible until it fails, and then it fails loudly: the door slams, or it drifts and never latches, which quietly leaves your building unlocked.

Most closers do not need replacing. Closing speed, latch speed and backcheck are adjustable, and the majority of complaints we see are an adjustment away. We will say so rather than selling you hardware.

What the visit includes

  • Closing speed, latch speed and backcheck adjusted
  • Leaking or seized closers replaced
  • Opening force set to ADA-accessible limits where required
  • Hold-open, delayed-action and fire-rated closers
  • Doors confirmed to latch fully every single time
  • Reinforcement where the closer has pulled from the frame

You probably need this if…

  • The door slams hard enough to be heard across the building
  • The door drifts shut without latching
  • Oil is weeping from the closer body
  • The door is too heavy for customers or staff to open comfortably

Questions

Door Closer Repair & Installation FAQs

The door shuts but does not latch. Is that the closer?

Usually yes, and usually the latch-speed adjustment — the last few inches need enough force to drive the latch into the strike. It is also the most security-relevant setting on the door, because a door that does not latch is a door that is not locked.

Can you make a heavy door easier to open?

Within limits, yes. Closers have an adjustable spring size, and accessibility guidance caps opening force on many interior doors. We set it as light as the door and the code allow.

Need door closer repair & installation?

Call 623-207-8796 and you get a price before anyone touches a lock.

Mon–Fri 7am–6pm · evenings & weekends by appointment

Call nowText

Door closer repair